INFINISIL™ Fiberglass Inserted Silicone Sheet Rubber
Jump to Navigation
INFINISIL™ Fiberglass Inserted Silicone is preferred where dimensional stability from mechanically reinforced silicone sheet rubber is required. It is resistant to extreme high and low temperature ranges and is proven to be an excellent gasketing material. With increased tensile strength from fiberglass reinforcement may be used in belting and diaphragm applications.
Customized products to your specification are available.
Please contact us to learn more.
- Temperature Range: -80°F to +450°F
- Roll Width: 36", 48"
Molded Sheet Size: 36"x36", 48"x48" - Trim: Untrimmed
- Finish: Smooth
(Nylon Fabric Finish also available) - Color: Red
(Other colors are available) - Stock Item Minimum: One Foot
Non-Stock Item Minimum: Please contact us for minimums & availability
Silicone Rubber Physicals
| Durometer Hardness (Shore A ± 5) |
Compound | Thickness (inches) |
Width (inches) |
Tensile (psi) | Ultimate Elongation (%) |
Estimated Weight Per Linear Foot (1/8" x 36") |
||
|---|---|---|---|---|---|---|---|---|
| Minimum | Typical | Minimum | Typical | |||||
| 40 | 040S0842 | Rolls: 1/32 - 1/4 Molded Sheets: Up to 4 |
36, 48 | --- | 750 | --- | 450 | 2.36 lb |
| 50 | 050S0843 | Rolls: 1/32 - 1/4 Molded Sheets: Up to 4 |
36, 48 | --- | 750 | --- | 400 | 2.46 lb |
| 60 | 060S0844 | Rolls: 1/32 - 1/4 Molded Sheets: Up to 4 |
36, 48 | --- | 800 | --- | 350 | 2.63 lb |
| 70 | 070S0845 | Rolls: 1/32 - 1/4 Molded Sheets: Up to 4 |
36, 48 | --- | 800 | --- | 300 | 2.59 lb |
Fiberglass Fabric Physicals
| Weave | Count | Weight | Thickness | Breaking Strength | Specification |
|---|---|---|---|---|---|
| Plain | 28 x 20 | 11.8 oz per sq yd | 0.013" | 525 x 375 | MIL-Y-1140H Class C Form 4 |
Other Silicone Sheet Rubber Products
INFINISIL™ Spec-Grade Performance Silicone
| Polymer: | Silicone |
|---|---|
| Duro: | 40–70 |
| Thick: | 1/32–1/4 |
| Spec: |
|
INFINISL™ FDA Performance Silicone
| Polymer: | Silicone |
|---|---|
| Duro: | 40–80 |
| Thick: | 1/32–1/4 |
| Compliance: |
|
Other Cloth–Inserted (CI) Sheet Rubber Products
Cloth–Inserted SBR – Regular Polyester Ply
| Polymer: | SBR |
|---|---|
| Duro: | 65 |
| Thick: | 1/16–1/4 |
| Feature: |
|
Cloth–Inserted SBR – Reduced Polyester Ply
| Polymer: | SBR |
|---|---|
| Duro: | 65 |
| Thick: | 1/8–1/4 |
| Feature: |
|
Cloth–Inserted Neoprene – Regular Cotton Ply
| Polymer: | Neoprene |
|---|---|
| Duro: | 70 |
| Thick: | 1/16–1/4 |
| Feature: |
|
Cloth–Inserted Neoprene – Regular Polyester Ply
| Polymer: | Neoprene |
|---|---|
| Duro: | 70 |
| Thick: | 1/16–1/4 |
| Feature: |
|
HHP–151F Cloth–Inserted Sheet
| Polymer: | Nitrile, SBR & Neoprene |
|---|---|
| Duro: | 50–60 |
| Thick: | 1/16–1/4 |
| Feature: |
|
Our rubber products are a proprietary blend of various polymers formulated to meet stated physicals and specifications. The named product polymer is not necessarily the primary polymer representing the highest percentage of the polymer blend. Determination of the suitability of the goods for the uses and applications contemplated by Buyer and others shall be the sole responsibility of the Buyer or user. No guaranty is given with respect to length of service on any particular application. Suggestions or recommendations made by Seller in its product literature concerning uses or applications of the goods are believed to be reliable, but Seller makes no warranty or guaranty of results to be obtained since the conditions of the use and application by Buyer and others are beyond Seller’s control.
View complete Terms & conditions of Sale for suitability of use and formulations >
View Cart (